3150 3000W Fiber Laser Cutting Machine
- 产品详情
- 产品参数
1 | Laser cutting machine GC3015/60250 3000w | 1 | Set
| ||
Payment method : payment T/T. | |||||
Notice | The above quotation is valid for 15 days, | ||||
2. Dual-drive Fiber Laser Cutting Machine
FBPL-3015/6025 3000W
(1) Equipment name: FBPL-Fiber Laser Cutting Machine
(2) Quantity: 1 Set
(3) Equipment use: mainly used for cutting CS, SS, AL,titanium alloy, high-temperature alloy, etc.
3. Processing range and capacity
(1) Suitable for cutting space: two-dimensional plane cutting;
(2) Cutting range: high-quality cutting 0.5~20mm carbon steel, 0.5~12mm stainless steel, aluminum alloy 0.5~8mm,
(3) Typical cutting samples
Material: Stainless steel Thickness: 5mm Material: carbon steel Thickness: 5mm
4. Cutting Parameters
Material | Thickness | Cutting Speed （m/min） | Gas | Cutting Height(mm) | Use Power(%) |
carbon steel | 1 | 10.8 | O2 | 1 | 25 |
2 | 6.6 | 1 | 35 | ||
3 | 4.2 | 1 | 90 | ||
4 | 3.6 | 1 | 98 | ||
6 | 2.4 | 1 | 98 | ||
8 | 1.8 | 1 | 98 | ||
10 | 1.1 | 1 | 60 | ||
12 | 0.9 | 1 | 80 | ||
14 | 0.8 | 1 | 60 | ||
16 | 0.72 | 1 | 70 | ||
18 | 0.65 | 1 | 80 | ||
stainless steel | 1 | 42 | N2 | 0.6 | 100 |
2 | 12 | 0.6 | 100 | ||
3 | 9 | 0.6 | 100 | ||
4 | 6 | 0.6 | 100 | ||
6 | 2.1 | 0.6 | 100 | ||
8 | 1.2 | 0.6 | 100 | ||
10 | 0.9 | 0.6 | 100 | ||
brass | 1 | 21 | N2 | 0.6 | 100 |
2 | 12 | 0.6 | 100 | ||
3 | 6 | 0.6 | 100 | ||
4 | 3.6 | 0.6 | 100 | ||
5 | 2.4 | 0.6 | 100 | ||
6 | 1.5 | 0.6 | 100 | ||
8 | 0.6 | 0.6 | 100 | ||
Aluminum plate | 1.5 | 24 | N2 | 0.6 | 100 |
2.5 | 9.6 | 0.6 | 100 | ||
3 | 7.2 | 0.6 | 100 | ||
4 | 3.6 | 0.6 | 100 | ||
5 | 2.4 | 0.6 | 100 | ||
6 | 1.8 | 0.6 | 100 | ||
8 | 0.9 | 0.6 | 100 |
5. Technical Specifications
precision | ±0.01MM |
Host structure | Dual-drive gantry structure |
Profile width | 2000mm/2500mm |
Outline length | 3500 mm/6000mm |
Cutting the thickness of the steel plate | Carbon steel ≤ 16mm, stainless steel ≤ 12mm |
X and Y axis drive mode | Domestic precision rack and pinion (helical tooth) |
X-axis effective cutting range | 1525 mm/2500m |
Y-axis effective cutting range | 3000 mm/6000mm |
Maximum X/Y axis linkage positioning speed | 30m/min |
Maximum acceleration in the X,Y axis | 0.3 |
Power supply parameters | Depend customer option |
Number of phases | 3 |
Power supply voltage rating | 380V |
frequency | 50Hz |
Total power protection rating | IP54 |
Maximum table load | Not including table |
Machine weight | 500Kg |
Dimensions (L×W×H) | 3500mm×2010mm×1500mm |
6. The Main Configuration
1.Main configuration
No | name | Specifications and grades | Suppliers | |
1 | Laser generators | 1000W-3000W Continuous Fiber Laser | MAX | |
2 | Laser cutting head | Raytools | CHINA | |
3 | Vertical tracking system | A set of original imported capacitive sensors | Raytools | |
4 | CNC and software systems | Raytools | CHIAN | |
5 | Industrial control system | Domestic | All-in-one machine | |
6 | Industrial displays | Domestic | Standard | |
7 | Transmission system | AC servo-electric motor | Inovance | |
Rack and pinion: domestic helical teeth | Jiangsu | | ||
Guide rail: aluminum alloy | K-tronics | | ||
Reducer | xingxing | | ||
Energy chain: MENGMA | MENGMA | | ||
Dust cover: fire-resistant material | K-tronicslaserDT | |||
8 | Pneumatic system | Imported SMC, FESTO company product composition: | SMC,FESTO,AIRTEC | |
9 | Host Standard Section | The gantry structure type of the bed is X, Y-axis rack and pinion transmission, and Z-axis ball screw transmission | K-tronics | |
High-pressure cutting system | SMC,FESTO,AIRTEC | | ||
Electrical components:French Shlinorde | Shanghai | Standard |
7. Structural and functional characteristics of the machine tool
1.Fiber laser cutting machine host
The main machine of the machine tool is composed of the bed, the Z-axis device of the beam, the operation control part, the air and water circuits and other parts.
(1)Bed part:
The bed is made of aluminum alloy profile structure, which is finished after secondary vibration aging treatment, simple and easy to install, occupies a small space, and can be loaded with more than 20 sets of containers, and this product is suitable for 3000w power and batch cutting.
The X, Y and Z axes are all servo motors, equipped with high-rigidity precision reducers and grinding racks and pinions, high-precision, optical axis linear guide rails and other high-efficiency transmission mechanisms, which effectively ensure the accuracy of transmission.
(2)Beam section:
The use of aluminum alloy material, light weight, good dynamic performance; The integral casting method is adopted, which is roughed after annealing to eliminate internal stress, and finished after secondary vibration aging treatment, which ensures the overall strength, rigidity and stability of the beam.
(3)The Z-axis moves the unit up and down:
The Z-axis up and down device is to realize the up and down movement of the cutting head. After the capacitive sensor in the Z-axis device detects the distance from the cutting nozzle to the surface of the plate, the signal is fed back to the control system, and then the control system controls the Z-axis motor to drive the cutting head to move up and down, so that the distance between the cutting nozzle and the plate is controlled unchanged, and the cutting quality is effectively guaranteed.
(4)Gas and water systems:
The gas path of the fiber laser cutting machine has two parts, one part is the cutting gas provided to the cutting head: clean and dry compressed air, nitrogen and oxygen; The other part is auxiliary compressed air, which is used for the gas used for the partition cylinder and the workbench clamping cylinder during the partition exhaust.
The waterway system of the fiber laser cutting machine mainly includes two parts: after the cooling water comes out of the chiller, it enters the laser in two ways, one way enters the cutting head of the laser machine and cools it, one way enters the inside of the fiber laser and cools it, and returns to the chiller after circulation.
8. Relevant standards for equipment design and manufacturing
a) GB 5226.1-2008 Electrical Safety of Machinery Electrical and mechanical equipment Part 1: General technical conditions.
GB/T 10320-2011 Electrical safety of laser equipment and facilities.
b) GB 7247.1-2012 Safety of Laser Products Part 1: Equipment Classification, Requirements
c) GB/T 9969-2008 Instruction Manuals for Industrial Products General Provisions
d) GB/T 16769-2008 Metal cutting machine tool Noise sound pressure level measurement method
e) GB/T 17421.2-2000 General rules for machine tool inspection Part 2: positioning accuracy and repeated positioning accuracy of CNC axis
f) GB/T 19866-2005 General principles of welding process specification and evaluation
g) GB/T 23567.1-2009 Reliability assessment of CNC machine tools Part 1: General provisions
h) JB/T 8832-2001 Machine tool numerical control system general technical conditions
i) GB/T 13306-2011 Signs
9. Installation and acceptance
Equipment on-site power distribution requirements: 380V, 50HZ, three-phase unbalance< 2.5% capacity, not less than 80KVA.
The equipment should be installed with a special grounding, and its grounding resistance is not greater than 4Ω.
On-site gas supply requirements: oxygen, nitrogen purity greater than or equal to 99.99%
After the product is transported to the user's installation site, our company will send experienced mechanical and electrical installation and commissioning personnel to the user's site to be responsible for the installation, commissioning and specimen cutting and processing of the product. The final acceptance is carried out in accordance with our company's acceptance standards at the user site: the acceptance items include: the appearance quality of the machine tool, the configuration of each part of the machine tool, the cutting accuracy and quality, the performance parameters, the stability, the work test, etc.
The user's on-site installation site should meet the industrial-grade ground standard. The thickness of the ground concrete foundation is greater than 200mm, and the flatness is less than 10mm every 3 meters. There are as many vibration sources as possible around the installation site.
The acceptance of the machine is carried out in two steps：
The first step is acceptance
1.The preliminary acceptance of the product is carried out in our company
2.The product acceptance shall be carried out according to the technical agreement signed by both parties
3.Product visual inspection：The pipeline layout should be reasonable, neat and beautiful, reliable connection, uniform paint surface and beautiful decoration, and no defects such as bumps in the appearance of the product.
4.Product configuration check.
5.On-site inspection of the quality of cutting samples.
The second step is acceptance
1.The final acceptance of the product is carried out at the user's site
2.The product acceptance shall be carried out according to the signed technical agreement and the acceptance handover order, and the trial cutting materials shall be provided by the user. If the user needs to accept the typical workpiece drawing, please provide the typical drawing in advance.
3. After the installation and commissioning is completed, the product runs normally and the installation and commissioning are qualified, and the warranty period begins.